Are you interested in collecting the famous coins from the 50 states? Are you looking for high-value 2007 quarters and want to know if they are worth anything? Then our list of mistakes from the 2007 quarter will be useful.
In honor of the Union’s fifty states, the 50 State Quarters Program ran from 1999 to 2009. The U.S. Mint made five quarters in 2007 to honor the states of Washington, Idaho, Wyoming, and Utah.
Even though the program was very popular, 2007 quarters that have been used are only worth what they say on them.
Gem-quality quarters that have never been used can be worth a lot of money, but they are hard to find. If you want to get 2007 quarters that are worth a lot of money, you might want to collect mistakes.
Our list of 2007 quarter mistakes shows that error coins can sell for hundreds or even thousands of dollars. Bugs can make your collection much more valuable if you know how to find the right ones.
1. 2007-P M65 Montana Quarter Partial Tilted Collar Error
Among your 2007 quarters, you may find an interesting mistake called the “partial tilted collar.” There are clear steps around the edge of the coin, which is a rim mistake.
If the collar is only partly deployed, the planchet won’t fit inside the collar all the way. This is an error. When the die hits the planchet, this makes the collar leave lines along the edge of the coin. If you look at the coin from the edge, you can see this mistake.
Usually, when the collar is fully extended, it will make perfect reeds around the edge of the coin. If the deployment isn’t done right, on the other hand, the rim will be imperfect and have one or more collar lines stamped on it.
A partially tilted collar mistake on a coin may be worth a lot of money, depending on how good it is. One example is a 2007-P partial tilted collar Montana quarter mistake that was sold at Heritage Auctions in 2020 for an impressive $725.
2. 2007-P MS64 Idaho State Quarter With Lamination Bubbling Error
Another mistake that shows up in the 2007 quarters series is the coating mistake. There are different kinds of lamination errors, but they all cause the bond between the copper core and the upper clad layer to become weaker.
If there are impurities in the metal when the planchet is being made, they can weaken the bond between the clad layer and the copper core, which can cause the planchet to bubble, crack, or peel. Some of these effects are very powerful and cost a lot.
The Great Collections auctioned off a 2007-P Idaho state quarter error rated MS64 with a lamination bubbling error on the back for $915 in 2021. This would be a cool addition to your quarters collection.
3. 2007-D MS65 Double Denomination Error Montana Quarter Struck With A Nickel Die
There is a big mistake in the 2007 run called the “double denomination error.” Because of this mistake, one coin was made with dies that are for two different amounts of money.
In this case, a Jefferson nickel hits a Montana 2007 quarter a second time. So, on the front, you’ll see the shape of a normal Washington quarter along with a picture of Jefferson like on the nickel.
The coin is struck the first time with the right die, but for some reason it is fed into the coining hub of a different denomination. This is called a doubled denomination mistake. Because of this, one coin has the pattern of two different amounts on the same side.
So, what should you expect from a mistake with two different amounts? This common mistake can be worth a lot of money! One buyer paid a huge $1250 at a Heritage Auctions sale in 2021 for a 2007-D double denomination error coin. This coin had a Montana quarter struck twice with a nickel die.
4. 2007-D MS66 Utah Quarter Die Chip Error Obv/Rev
One of the most common and easy mistakes to find in coins is a die-chip. This flaw can be very valuable, especially on gem-quality coins that have never been used.
There is a die chip mistake when a small piece breaks off and falls off the surface of the coin, leaving a hole that is slowly filled with metal pieces. As the die keeps working, the metal-filled gap eventually makes a mark on the coin’s surface.
It looks like die chips are small, raised bumps on the surface of the coin. Some are placed in unusual ways, which makes the coin more interesting and raises its collectible value. In fact, die chips that are bigger, more interesting, or just plain weird will usually be worth more.
The Great Collections sold a 2007-D Utah quarter rated MS66 with die chip errors on the obverse and reverse for a huge $1035 at an auction in 2022. This is a great coin to add to your collection.
5. 2007-P MS65 Washington Quarter Double Struck 90% Off Center Error
Our next mistake is the double strike, which you might find when you are collecting 2007 quarters. A double struck error happens when the same coin is struck twice, or even more than once, so the pattern shows up on the same side of the coin more than once.
So, on the quarter, Washington’s face will show up twice on the front of the coin. This error happens when the coin doesn’t come out of the coining press all the way, letting the die hit the coin twice.
Different kinds of double strikes happen based on where the coin was when it was struck a second time. The double-struck off-center, double-struck flip over, double-struck on-center, and multi-struck errors are all common cases.
A buyer paid a crazy $1335 on eBay in 2023 for a 2007-P Washington double struck off-center quarter error graded MS65.
Also See:-Rare 2007 George Washington Dollar Coin Errors Worth Money (Full List)
6. 2007-P MS65 Wyoming State Quarter Struck Through Grease Error on Both Sides
The strike-through is another mistake you might find in the 2007 quarters series. This is a mistake; the coin has the mark of something that was hit by chance onto the planchet.
If something like a hair, thread, metal, wood, or grease gets stuck between the die and planchet, it’s called a struck-through mistake.
Usually, these stray items fall off, but they leave a mark on the coin’s surface. However, the object may sometimes stick to the coin’s surface, leaving a struck-through mistake that is still there, which is usually worth more.
The Great Collections sold a 2007-P Wyoming quarter struck through grease mistake graded MS65 at auction in 2022 for a huge $920.
7. 2007-D MS66 Utah Partial Missing Clad Error
If you’re putting together your state quarter set, you might find a clad mistake coin that you need. It’s called a “missing clad error” when the top layer of cladding peels off, showing the copper core inside.
If there are impurities in the metal when the planchets are being made, the top clad layer may peel off. There is a chance that the layer will peel on one or both sides, which could lead to a missing clad mistake.
How much this kind of mistake is worth depends a lot on how good the coin is. Uncirculated coins that look like gems will usually sell for more. At a Heritage Auctions sale in 2023, a 2007-D partial missing clad error Utah quarter graded MS66 went for a huge $1,230.
8. 2007-D Wyoming State Quarter Rim Cud Error
When there is a rim cud error, there is a bump along the coin’s circle. This mistake happens when a piece breaks off along the edge of the die, leaving a gap that is slowly filled with metal pieces as the die keeps working.
The gap filled with metal will leave its mark on one or more planchets over time. This makes a coin with a rim cud, which is a high bump along the edge.
More often than not, bigger rim cuds are worth more. Keep an eye out for quarters that have cuds showing around the edge; these could be worth more. At a Heritage Auctions sale in 2022, a 2007-D Wyoming state quarter graded MS65 that had a rim cud mistake sold for $720.
9. 2007-S MS68 Washington State Quarter Doubled Die Reverse Error
Around the same time in 2007, some quarters were also made at the San Francisco mint along with those made at the Philadelphia and Denver mints. These last quarters are some of the most expensive uncirculated coins in the series. They are called “proof coins.”
One of these proof quarters had a die mistake where the die was doubled on the back, mostly around the mint mark. A doubled die mistake happens when the die hits the coin more than once, but at slightly different angles each time. This makes the writing appear twice.
Any mistake is more important when there is a strong doubling. Heritage Auctions sold a 2007-S (proof) Washington quarter with a doubled die mistake on the back for an unbelievable $1522 in 2023. This was one of the most valuable errors in the series.
