Should you keep Roosevelt dimes? What should you expect from a Roosevelt dime? Our list of 2008 dime mistakes will help you learn more about collecting valuable dimes.
There are a lot of common Roosevelt dimes that are cheap and easy to find. These coins are only worth what they say on them. It’s not easy to find dimes that are still new. Few gem-quality dimes are found, and when you first start collecting them, they can be very expensive.
There are lots of ways to get dimes, but getting mistakes is one of the best. When the mint makes a mistake, it makes each dime unique. If you know how to find the right ones, they can be worth hundreds or even thousands of dollars.
If you want to get the most for your money, look for Roosevelt dimes that have been never been used and have mistakes on them. Let’s get right to our list of 2008 dime mistakes and find Roosevelt dimes that are worth a lot of money.
1. 2008-P MS62 Roosevelt Dime Die Clash Error
The dies push against each other very hard, which means that their shapes may end up being impressed onto each other. For instance, on a coin with a die clash error, you might see Roosevelt’s face on the front and a hint of the back design because of the die clash error.
So, what should you expect from a die clash coin mistake? Folks have paid a lot of money for mistakes like this. At a 2020 Heritage Auctions sale, a collector paid a crazy $748 for an MS62 2008-P dime with a die clash mistake on the front.
2. 2008 Ms62 Roosevelt Dime Missing Clad Layer
The 2008 Roosevelt dime series also has a mistake where the felt layer is taken away. The coin is flawed because it lacks the top layer of cladding on one or both sides.
There are some impurities in the metal that can make it hard for the upper clad layer to bond to the copper core of the planchet. If the clad layer isn’t properly attached to the copper core, it could peel, crack, or bubble.
When the top coated layer peels off on one or both sides, the copper core can be seen. It’s called a partly missing clad layer if the top layer of insulation is missing on one side. If the top layer is missing on both sides, it is called a full missing clad layer mistake.
The state of the coin has a big effect on how much a missing clad layer dime error is worth. An impressive $530 was paid at the Heritage Auction in 2021 for an MS62 2008-P Roosevelt coin that was missing its clad layer.
3. 2008-D MS60 Roosevelt Dime Improperly Annealed Planchet Error
Next on our 2008 dime errors list is the improperly annealed planchet. This is a mistake; the coin has a different color tone than it should because of problems with the melting process.
Annealing is the process of cooking and cooling the planchet so that it is ready to be minted. Changes in the rate of cooling and heating can make the planchet’s color change in big ways. The coin might not look like a dime because it might look dark, yellow, purple, orange, or even red.
There may be a mistake in the way the planchet was heated on a Roosevelt dime that gives it a different color tone. In 2021, a buyer bought a 2008-D Roosevelt dime on eBay for $315. The grade was MS6 and the planchet was not properly annealed. This is something that you should add to your library.
Also See:-Rare 2007 Quarter Errors Worth Money (Full List)
4. 2008-P MS63 Roosevelt Dime Die Adjustment Strike Error
The die change is another mistake you might make when collecting 2008 Roosevelt dimes. This is a mistake where the coin has a very weak strike on both sides.
The dies may make a weak first strike on the planchet when the mint workers fix them. This could be because the die and planchet aren’t touching enough. However, once the die makes good contact with the planchet, the next hit might be strong.
5. 2008-D MS65 Roosevelt Dime 5% Struck Off Center Error
In the 2008 Roosevelt dime series, the off-center strike mistake can show up and could fetch a higher price. This is a mistake where the image on the front, back, or both sides of the coin is struck not in the middle but closer to the edge.
If the die and planchet are not lined up correctly, an off-center strike mistake could happen. So, the die doesn’t hit the middle of the planchet like it usually does; instead, it hits near the edge. This often means that some of the coin’s features are lost, like the writing or devices on it.
The value of your off-center strike dime error will mostly depend on how far away from the center the design is hit. For instance, a dime with a design struck 55% off-center might be worth more than one with a design struck 15% off-center.
Heritage Auction sold a 2008-D Roosevelt dime graded MS65 with a 5% off-center strike mistake for $635 in 2022. This is an error that you should look for.
6. 2008-P MS63 Roosevelt Dime Struck Thru Grease Error
The next mistake we’ll talk about on the 2008 dime is the struck through. There are different kinds of struck-through mistakes, but they all happen in the same way.
When something else gets stuck between the die and the planchet, it’s called a strike through mistake. The item usually falls off, but sometimes it might stick to the planchet when it is hit, which would cause a retained struck-through error.
Foreign items like hair strands, grease, metal, wood, string, or cloth can get stuck between the die and the planchet. These things could make a big mark on the coin’s surface, which would be a strike-through mistake.
Heritage Auctions sold a 2008-P Roosevelt dime rated MS63 with a sticky mistake on the front for an impressive $585 in a 2020 sale. A weak or fuzzy strike on the front or back of the coin is often caused by grease struck-through mistakes.
7. 2008-D MS65 Roosevelt Dime Doubled Die Obv/Rev Error
When you double a die, you make one of the most common and easy mistakes. This is a mistake where you can see that the devices and/or writing on the front or back of the coin have been doubled.
When the die hits the planchets more than once at slightly different angles, this is called a “doubled die.” This means that the devices or writings overlap with each hit.
In general, the mistake is worth more when the doubling is stronger. The state of the coin will, of course, also affect how much it’s worth. The Great Collection sold a 2008-D Roosevelt dime rated MS65 with a doubled die error on both the front and back for an impressive $620 in 2023.
8. 2008-D MS63 Roosevelt Dime Double-Struck Error
When you’re gathering 2008 dime errors, the double-struck is another interesting mistake you might find. As the name suggests, this is a mistake where the die hits the same planchet twice, making the front or back pattern show up twice on the same side.
When the planchet is struck but doesn’t come out of the collar, it is struck again, and sometimes a third time. This is called a double-struck mistake.
The planchet should automatically come out of the pressing hub, but sometimes technical problems stop this from happening. This means that the die will press the image onto the coin more than once.
A double struck mistake is very noticeable, and a used copy of it may be worth more than a new one. The Great Collection sold an MS63 2008-D Roosevelt dime with a double-struck error at auction in 2022 for a huge $1020. This is a great mistake to add to your collection.
9. 2008-D MS60 Roosevelt Dime Clamshell Planchet Split Error
A big mistake that shows up on the 2008 Roosevelt coin series is the clamshell planchet split. This is a mistake; the coin’s top layer is split down the middle because of impurities in the metal.
There may be contaminants in the coin that weaken the bond between the copper core and the upper clad layer. This could cause a big split that makes the coin look like a clamshell.
A crazy $1050 was paid on eBay for a 2008-D Roosevelt dime that was graded MS60 and had a clamshell planchet split mistake. This mistake doesn’t happen very often, but if you find one, it could be worth a lot of money.
